The Greens senator says the fact South Australia’s algal bloom is yet to be declared a national disaster reflects the need for a new set of criteria for climate disasters, as the Senate begins an inquiry into the toxic event.’If this had been on the northern beaches of Sydney or on Bondi, would it have taken so long for the government to respond?’, Hanson-Young said. ‘Frankly, I think it probably wouldn’t have’
As extreme wind events are becoming more intense across New Zealand and the Pacific, roofs are often the first point of failure. But they remain one of the most overlooked elements in discussions about resilience and safety.
Increasingly, non-cyclonic wind storms are revealing deep-rooted vulnerabilities in our built environment, particularly in our roofs.
Despite repeated damage, public awareness of roofing vulnerability and how to address it remains low.
Small mistakes, big consequences
A typical roofing system consists of cladding fixed to a supporting structure (such as battens or purlins) using fasteners, often self-piercing screws. The supporting structure is connected to the rafters, which are then attached to the walls, forming a continuous load path that transfers wind forces to the ground.
Among these components, the connection between the roof cladding and the supporting structure is particularly vulnerable because it is directly exposed to wind pressures during extreme weather events.
In New Zealand, the Metal Roofing Manufacturers Association provides industry guidelines and supports research on the performance of metal roofing and cladding.
Roof failures during wind events rarely occur at random. More often, they begin with localised connection failures, which then spread across the roof system. Typically, this manifests as roof cladding “pulling through” the fastener, where the fastener stays attached to the supporting structure but the cladding detaches.
A “pull-out” failure may occur when the fastener detaches from the supporting structure while remaining fixed to the cladding. These weaknesses in the connections can rapidly escalate, leading to partial or total roof collapse.
Such failures don’t just lead to expensive repairs. They compromise people’s safety, expose homes to rainwater damage and create high-velocity debris that poses further risks during the storm and in the aftermath.
Even partial roof failures can overwhelm infrastructure, delay disaster recovery and inflate insurance claims. This raises systemic questions about how we design, test and regulate roofing systems in storm-prone regions.
A major issue lies in the misconception that roofs can be treated as peripheral or cosmetic elements. In truth, they are structural components, and they should be treated with the same rigour as any other critical load-bearing system.
Next generation of roofs
Our research group is addressing this challenge through a combination of full-scale wind-load testing and advanced modelling simulations.
We are developing a scientifically grounded understanding of how metal roof cladding behaves under extreme wind pressures, both cyclonic and non-cyclonic, and how fastener arrangements and cladding profiles influence the resilience of roofing systems.
This work is helping to quantify what has previously been anecdotal – how minor design or installation oversights can trigger catastrophic failures. Our data will feed into improved building codes, resilient design practices and potentially new product standards for roofing systems in New Zealand and beyond.
It is time to treat roofs not just as shelters but as engineered systems with quantifiable risks and performance criteria.
We strongly recommend using only code-compliant roofing products, particularly those tested for uplift resistance under both cyclonic and non-cyclonic wind loads.
While roofing companies are required to use code-compliant materials, not all products are rigorously tested or certified for the specific wind regions where they are installed. Emphasising uplift-tested compliance ensures materials meet the minimum code requirements while offering proven safety and performance under diverse wind conditions.
Roof installers should also be trained and certified to ensure workmanship is not the weak link in an otherwise well designed system. We also encourage regular inspections and maintenance, particularly after minor wind events, which can loosen components and create vulnerabilities for the next storm.
Extreme winds are no longer rare events; they are part of our climate future. But each storm also offers an opportunity to learn, adapt and build better.
We need a shift that sees roofs not as afterthoughts but as front-line defences. Through science and smarter design we can reduce risk, protect lives and build a more resilient New Zealand.
The authors do not work for, consult, own shares in or receive funding from any company or organisation that would benefit from this article, and have disclosed no relevant affiliations beyond their academic appointment.
For many plants, spring is just a really good time. They have endured a cold, dark, hard winter and in some places, winters can be murderously tough for plants.
It makes sense that when spring comes around, plants are ready to take advantage of warmer temperatures, longer days and more sunshine. They resume growth after their winter dormancies and many rapidly produce flowers.
You’ve probably been spotting the sudden springtime explosion of flowers everywhere on your neighbourhood walks, your commute or in your own garden.
But why exactly do flowers go crazy in spring, and how do they know exactly when to show up for duty? Here’s the science.
Letting loose in a big rush
For many plants, the conditions for growth in spring are close to ideal. Water, warmth and sunlight are suddenly readily available.
Plants don’t have to hold back anymore. They can resume almost unconstrained growth and have the energy and resources to invest in flowering.
Your garden (or a patch of natural bush) is, in fact, a highly competitive environment.
Plants will rush to produce masses of flowers in the hope this will give individual plants an advantage in the reproductive race that ultimately might lead to seed and reproduction. This, after all, is the universal goal of biological success.
There is another factor, however, that also influences spring flowering.
Flowering plants (known as angiosperms) are relatively recent arrivals on the evolutionary time line. They first became significant during the Cretaceous Period, about 100 to 120 million years ago.
By then, insects had already been on the scene and evolving for millions of years. Birds had evolved more or less at the same time as these flowering plants, becoming more common during the Cretaceous Period too, but a few million years earlier.
These creatures, the plants noticed, were excellent at dispersing pollen and seeds. Many flowering plants evolved to use their helpful services.
Before the angiosperms, ancient plants used spores for reproduction. Conifers, which had evolved hundreds of millions of years before angiosperms, used wind to disperse their pollen. Seed dispersal was often limited, unreliable and slow.
Flowering plants needed to attract pollinators and seed dispersal vectors, such as insects and birds. Many developed flashy and showy flowers: the epitome of good advertising.
So flowering in spring coincides with the return of migratory birds and the life cycles of insects (insect activity usually declines over winter).
It makes great sense that many plants flower when the insects and birds so vital to their reproductive success are also getting active (and getting busy).
It is a matter of great timing that benefits all involved.
The way flowering plants time their flowering is superb biology.
Many people assume warmer temperatures trigger spring flowering. But temperature is renowned for its variability and unpredictability. Temperature is not a good indicator of season or time.
So most plants measure day length using a green pigment called phytochrome (literally plant colour). This exists in two forms, one of which is active in triggering plant metabolism.
This phytochrome system enables plants to measure, with remarkable accuracy, both day length (also known as photoperiod) and the night length.
The ratio of the two forms allows plants to measure time like a biological clock.
Photoperiod is a very accurate and reliable measure of time and season and so plants nearly always get their flowering times in spring right.
In some plants there is an extra feature that can affect flowering, where the plants produce an inhibitor (abscisic acid) before winter that keeps them dormant.
Abscisic acid is cold-sensitive. So when spring comes, the inhibitor level is low. This, combined with photoperiod, helps initiate flowering.
Flowering in spring means plants can use insects and birds to facilitate pollination and disperse seeds.
The pollen can be spread effectively and in a targeted way to other flowers of the same species. Less valuable pollen is wasted than if you’re relying on wind dispersal.
The seed can spread over much greater distances. The seed for many species will germinate during spring when growth conditions are highly favourable.
It’s not a coincidence flowering plants with this type of reproductive biology spread around the globe very quickly after their emergence during the Cretaceous Period.
They are highly efficient and successful plants.
Not everyone can be a flower in spring
So why don’t all flowering plants bloom in spring?
It is one of the delights of biology that there is nearly always room for contrarians and exceptions.
Some plants flower in autumn or perhaps during winter and some in summer, but there is always advantage in them doing so.
Sometimes it’s to avoid the fierce competition from all those other spring flowers in attracting pollinators.
Sometimes it’s because they are focused on a particular insect or bird vector that another season suits better.
Sometimes it’s because the plants can only survive in a highly competitive environment by not flowering in spring.
In the complex web of plant biology, a one-size-fits all approach never works.
Spring flowering has a lot going for it – as the current profusion of flowers attests – but many plants have made success of being different.
Gregory Moore does not work for, consult, own shares in or receive funding from any company or organisation that would benefit from this article, and has disclosed no relevant affiliations beyond their academic appointment.
In Far North Queensland, one special winged mammal helps keep rainforests alive. The spectacled flying fox travels vast distances each night, pollinating flowers and spreading seeds far and wide.
But the species is in trouble. It’s now listed as endangered, yet – as my new paper shows – little has been done to protect this vital species.
The spectacled flying fox has a PR problem. It can be seen as a noisy, smelly pest — especially when it roosts in urban areas. But this doesn’t justify inaction.
Local groups and scientists are working to protect the spectacled flying fox, but government support is lacking. Without urgent action, a species that helps hold rainforests together might be gone for good.
Spectacled flying-foxes in Cairns. The species’ numbers has plummeted in recent decades.Noel Preece
A spectacled forest saviour
The spectacled flying-fox (Pteropus conspicillatus) is named for the light-coloured fur around its eyes, which resembles spectacles. It’s found in the Wet Tropics and Cape York in Far North Queensland, and plays a vital role in the region’s rainforests.
Spectacled flying-foxes can fly more than 200 kilometres in a single night – leaving their roosts to find food and returning by morning.
The animals feed on the fruit and nectar of many tree species. They pollinate flowers and move fruits in their guts and mouths. This boosts biodiversity and helps keep trees healthy by preventing inbreeding.
Recovery plans aren’t enough
Global warming and habitat loss are the two biggest threats to the survival of the spectacled flying fox. Persecution by humans is also a threat.
The spectacled flying fox population is in sharp decline. Recent numbers are hard to come by, due to a lack of monitoring. But between 2004 and 2017, the species’ numbers fell by an estimated 75%, and it is listed nationally as endangered.
Authorities draw up “recovery plans” for some endangered species. The plans outline threats to a species, and the action required to prevent its extinction. Species that receive a recovery plan are considered fortunate. Many threatened species never get one.
Even a recovery plan does not prevent a species from declining. As I outline in my new paper, most of the 25 recovery actions for the spectacled flying fox haven’t happened.
They include protecting native foraging habitat, increasing knowledge of roosting requirements, and protecting important camps.
The National Flying Fox Monitoring Program did proceed. It provided scientific evidence that the spectacled flying fox population has declined, prompting a change in its status from vulnerable to endangered. However, the program is no longer operating.
Threats are growing
My paper also provides the first update since 2011 of threats to the spectacled flying fox.
Extreme heat is now a lethal reality for the species. For example, in 2018 a major heatwave in Cairns killed 23,000 individuals over several days. This was the first mass death recorded for the species.
Habitat destruction continues, despite the species’ endangered status. Every year, more than 2,000 hectares of forest – which could serve as habitat for the spectacled flying fox – is cleared.
Introduced grasses are also a threat because they change forest airflows which keep the roosts cool and increase fire risk.
Humans also pose a threat. Spectacled flying foxes have been harassed and deliberately killed. They can also become caught in nets over fruit trees and die.
Some people consider the spectacled flying fox to be a nuisance. This can lead to damaging policies that prioritise public convenience over a species’ decline.
A PR problem
Spectacled flying-foxes can congregate in large numbers and become noisy and smelly. They can also roost in urban areas and drop faeces onto properties and public places. This soils paintwork, swimming pools, roofs and clothes on washing lines.
But these impacts can be minimised – for example, by installing pool covers and shade structures.
Flying foxes carry diseases that can cause illness in people and livestock. Most can be prevented by hygiene measures and avoided by not handling bats. People who regularly handle bats are inoculated to prevent infection.
Sometimes, flying foxes are wrongly accused of carrying certain diseases, as occurred during the COVID-19 pandemic.
Flying foxes also eat fruits in gardens and orchards and can damage fruit trees. However, netting is available to protect fruit.
Looking ahead
Positive, citizen-led action is being taken to prevent the extinction of the spectacled flying-fox. For example, the Tolga Bat Hospital rescues individuals and advocates for the species.
But the continued decline in numbers of the spectacled flying fox shows much more action is needed.
Governments are not required to publicly report whether recovery plans are acted on. This must change. And long-term, dedicated funding is needed for conservation and research.
The spectacled flying fox urgently needs our help. The problems they cause can be managed, and their ecological value far outweighs the nuisance.
I am a non-executive director of Terrain NRM Ltd, which may contract with the Commonwealth and the State of Queensland for works associated with the spectacled flying fox. I have no direct association with such contracts. I am also a founding member of the spectacled flying-fox recovery team, from which I derive no financial benefit. I was contracted by the Commonwealth Department of Climate Change, Energy, Environment and Water to report on a meeting on the spectacled flying fox in 2023, which has now terminated.
New legislation aimed at fast-tracking priority energy and defence projects in Western Australia could put the environment at risk and lead to less transparent government, experts say.