Warm winters are waking snakes early. Here’s what that means for them and us

Warm winters are waking snakes early. Here’s what that means for them and us

Chris Jolly

For people in southeast Australia, springtime means soaking up the sun and getting our vitamin D levels back to baseline. But we’re not the only ones likely to be basking. Snakes are getting out and about, too.

A flurry of snake sightings in southern states during spring is nothing new. Snakes emerge from their winter hiding holes when the weather warms.

But we are often asked: will climate change lead to more encounters with our scaly neighbours? It’s a fair question.

Evidence suggests climate change could make snakes come out of hiding earlier. But it’s also likely to cause population declines or shifts in the long run, as snakes adjust to the new conditions.

So what conditions do snakes like?

Snakes are “ectotherms”. This means their internal body temperature depends on the surrounding environment and varies throughout the day and the season. People, on the other hand, are endotherms. We maintain a constant body temperature around 37°C.

Many snakes prefer a lower body temperature of 28–32°C. Cooler-climate species like to keep their bodies cooler still. But even then, they aren’t really “cold-blooded” if they can help it.

Unless it’s really hot, snakes need to chase the heat as soon as they wake up. This enables them to rapidly raise their body temperature to the optimal level so they can go about their daily or nightly routine. They can’t cool themselves by panting or sweating, so they need to shelter from the heat if it’s too hot.

In Australia, snake activity follows distinct patterns in the tropical north and more temperate south.

In the north, where temperatures are consistently warm, snakes avoid the harsh heat and are most active during early mornings, night time, and following the wet season (April to June).

In the south, snakes go into hiding during the cooler months. They slow their metabolism to almost zero and essentially sleep (or “brumate”) through the winter.

These southern snakes get ready to hunker down in autumn as the days begin to shorten. Sensing shorter days in winter keeps them asleep, preventing them from using fat stores or eating food they will not be warm enough to digest. That’s why even a warm sunny day in the middle of winter may not wake them up.

A combination of daily temperatures and daylight hours in spring then triggers southern snakes to wake up and begin the breeding season.

How will climate change modify snake activity?

Australia is likely to warm up to 5°C by the end of this century under a high-emissions scenario. What would that mean for snake activity?

When wild tiger snake body temperatures and activity were measured in Perth’s spring, the snakes only emerged from shelter once their bodies reached 16°C – provided it wasn’t raining. An increase in daily temperatures would mean these tiger snakes start (and end) their days earlier. They may also, at least initially, emerge earlier in the season.

Studies around the world have found snakes becoming active for more days of the year, and feeding more as daily average temperatures increase.

Does this mean we should be concerned about increasing snake populations?

No. The increase in temperatures means most snakes should be avoiding the peak summer heat and we may see less of them. We may also find more snakes become nocturnal.

Even if we do see more snakes, this may not mean the snake population has increased – perhaps the opposite. As snakes generally don’t want to be seen, increased visibility could indicate snakes are stressed. This may be an early warning sign of population decline.

A tiger snake on the ground
A western tiger snake (Notechis scutatus occidentalis) from an urban wetland in Perth. Damian Lettoof

Does climate change threaten Australian snakes?

Ten years ago, one study assessed the potential impact of climate change on Australian elapids (front-fanged venomous snakes) — the most common family of snakes in Australia. The range of most (65%) species was expected to shrink. A smaller proportion (13%) of species was predicted to expand their range, these being the semi-arid and arid-zone species.

Among commonly encountered species, red-bellied black snakes and tiger snakes were expected to suffer range contractions under four different models and scenarios. But the eastern brown snake could go either way.

Climate change is also increasing the frequency and intensity of extreme wildfires across the globe. While many Australian animal species are adapted to fire, some already on the brink might be pushed over the edge by climate change-driven shifts in fire regimes. For example, the Black Summer fires razed more than 70% of the endangered broad-headed snake’s habitat. These fires caused population crashes of 26–34% in this imperilled snake species.

Ultimately, snakes may become active earlier but may suffer declines in the long run as they adjust to the new climate.

Red-bellied black snake on the grass, lifting it's head, with a lake in the background
The range of red-bellied black snakes is likely to decrease as the climate changes. Ken Griffiths, Shutterstock

What does this mean for snake bite risk in Australia?

If changes in climate do increase encounters between humans and snakes – and the jury is still out at this stage – there is always the possibility this could lead to more snake bites.

But we can influence the outcome by choosing how to behave around snakes. If we’re vigilant — alert but not alarmed — when we’re in snake habitat, the chances of a bite are low (just make sure you know first aid).

A snake seen and left alone poses little threat to humans. If we wish to avoid bites, we must also supervise children and pets (and keep dogs on leads, and cats indoors). Raise children to become snake smart as early as possible. Remember to look where you are stepping, listen, and leave snakes alone.

The Conversation

Damian Lettoof receives funding from The Commonwealth Scientific and Industrial Research Organisation (CSIRO).

Chris J Jolly is supported by a Macquarie University Research Fellowship, and receives funding from Australian Research Council, Minderoo Foundation, and Department of Biodiversity, Conservation and Attractions (Government of Western Australia).

Timothy N. W. Jackson receives funding from the National Health and Medical Research Council.

Tuesday’s rally for Australian farmers lists seven priorities – but the biggest two are nowhere to be seen | Gabrielle Chan

The last time the National Farmers’ Federation marched on Canberra politicians were carefully controlled. This time the agenda looks more useful for politicians than farmers

In country circles, WhatsApp groups and emails have been pinging. As Tuesday dawns on the first rally endorsed by the National Farmers’ Federation since 1985, there has been a bit of chat about its merits.

The 1985 rally descended on the Hawke government. It numbered 40,000 to 45,000 people and was duplicated at some state parliaments. In Victoria, according to the journalist Martin Flanagan, 30,000 people protested, holding placards such as “farmer the new poor”, “Agricultural Income Deficiency Syndrome” and, my personal favourite, “wife home working”.

Sign up to receive Guardian Australia’s fortnightly Rural Network email newsletter

Continue reading…

What is 3-phase power? And how do I know if my house needs it?

What is 3-phase power? And how do I know if my house needs it?

If you’re building, renovating or planning to install a solar battery, your builder or installer might ask whether you’ve considered upgrading from single-phase to three-phase power. This upgrade often comes with a hefty price tag.

So what’s the difference between single-phase and three-phase power, and which one will you need?

Understanding your electricity needs

Each house service connection has a maximum amount of electricity that can be drawn from the grid at any one time before the main fuse blows. The limit varies, according to whether you have single- or three-phase power.

The amount is calculated by multiplying a house’s “amps” and “voltage”.

An “amp” is a unit of electric current. Most houses in Australia with single-phase connections have a standard capacity of 63 amps.

In New South Wales, the standard is 100 amps.

However, some older or rural homes in Australia may still have connections of 32 or 40 amps.

Then there’s voltage, which is the pressure that pushes the current through your wiring to power your house. Current and voltage values are determined by the local distribution network service provider, the company that owns and operates the poles and wires.

Since 2000, the standard voltage in most areas of Australia has been 230 volts. In Western Australia, it’s 240 volts.

Multiplying 240 volts by 63 amps gives you 15,120 watts of power (a watt is a unit of power).

So that means in a home with single-phase power, you can draw about 15,120 watts (or about 15 kilowatts) of power from the grid before the main fuse blows.

But this would probably require using all your appliances at the same time – an unlikely scenario.

Your energy bill can help you understand how much energy you’re using (and you can compare to how much other Australians use). When you see kWh (kilowatt hour) on your monthly energy bill, it’s a measurement of your electric appliances’ wattage and the amount of time you use them.

If you can reduce the amount of energy you need to draw from the grid, you might not need to upgrade to three-phase power at all. Solar panels and a battery can cut your electricity bills, keep the lights on during power outages, and reduce your carbon footprint. Plus, you can store energy for later use, boosting your home’s energy independence.

What’s the difference between single-phase and 3-phase power?

Think of single-phase power as a single-lane road.

It’s perfect for handling regular household appliances such as lights, fridges, washing machines, small air conditioners, small induction cooktops, and regular wall chargers for electric vehicles.

But if too many appliances are running at once, the single-phase circuit in your home can get congested. This can lead to issues such as tripping breakers or flickering lights.

Three-phase power is more like a three-lane highway, with each phase carrying peak power at a different point of time.

It’s designed to handle heavy loads such as a more powerful electric vehicle charger, large multi-zone ducted air conditioning systems, high-end and large induction cooktops and their combinations.

Do you need 3-phase power?

For most households, single-phase power is more than enough to keep everything running smoothly.

Unless you’re running a big property with a large swimming pool, fast-charging your electric car, operating an elevator, cranking up ducted air conditioning, baking in multiple ovens, and powering a high-end kitchen full of gadgets – all at the same time – you probably don’t need to make the switch.

That’s good news, because upgrading to three-phase power can be quite pricey (potentially thousands of dollars).

Equipping every house with three-phase power would be like giving everyone a sports car when a regular car does the job just fine.

Installing three-phase power in every home would make the network infrastructure more expensive to build and maintain. Most homes don’t need that much power, so the extra capacity would go to waste – but everyone would still be paying for maintenance of that larger, underutilised system via higher energy bills.

However, things may be changing

As more homes go all-electric and solar battery systems and electric vehicles become the norm, however, more people will switch to three-phase power.

Three-phase power unlocks incredible charging speeds for electric vehicles (but before you get too excited, make sure your car is equipped to handle that extra juice).

You might think it’s smart to get a much bigger solar panel system than you need, so you can earn extra money from feed-in tariffs by exporting excess energy to the grid. However, single-phase rooftop solar can only feed up to five kilowatts at any point in time in a day to the grid. If your system goes over that, you’ll need special approval to connect it.

Switching to three-phase power can be a great move if you’re looking to install a larger solar system. It lets you harness more energy for your home and potentially send more power back to the grid. It’s worth noting that in Australia, however, the amount of solar power you can export varies by state.

For bigger setups, such as solar systems with batteries that can handle up to 30 kilowatts, three-phase power might be necessary. An electrician will ensure everything stays balanced in your connection.

For most of us, the best way to work out whether you need single- or three-phase power is to work out your total electricity use and seek advice from a registered electrical contractor you trust.

Some will calculate how much power you’d need if you were running all the appliances and powered devices in your home at full blast, all at once. But it’s worth questioning whether this scenario would ever actually happen in real life.

No one wants to overspend on something they don’t actually need.

The Conversation

Asma Aziz is a member of the Institute of Electrical and Electronics Engineers.

Fairtrade charity says people are making ‘conscious’ choice to buy its products

Group praises nearly 70% of UK adults who bought Fairtrade products in past year despite cost of living crisis

Nearly 70% of UK adults have bought Fairtrade products such as bananas, tea or coffee in the past year despite pressure on personal finances, as concern that the climate crisis could push up the price of imported food drives “conscious consumerism”, the charity said.

Against the backdrop of this year’s big spikes in the price of coffee and cocoa, a YouGov poll, commissioned by the Fairtrade Foundation, revealed that 79% of Britons were concerned that climate breakdown could affect the price of food while 69% were worried it could disrupt supply to the UK.

Continue reading…