Anthony Albanese has said Australia will not stand in the way of Turkey hosting next year’s Cop31 climate summit, insisting the interests of Pacific Island countries should be prioritised amid a deadlock over where the 2026 event should take place.
As this year’s Cop summit enters its final days in Brazil, Albanese said Australia wanted to win the hosting rights, but conceded the risk of the event defaulting to Germany would present a poor outcome for global action on climate change.
Sydney Water is working to determine the source of high levels of grease and oil that caused debris balls to wash up on beaches across Sydney and the Central Coast.
Four years later, the Coalition have reversed course. After successive election losses, the Liberal and National parties have settled on a new climate strategy: give up on net zero and keep coal plants running longer.
If the Coalition is elected and puts this plan into action, it would mean radical change. Many policies focused on carbon emissions or climate change would be scrapped. It does plan to honour Australia’s pledges under the Paris Agreement, although it’s unclear whether the current commitment to cut emissions by 62-70% below 2005 levels by 2035 would remain.
The Coalition claim emissions would still fall under their plan. But this is questionable, given extending coal would mean more emissions, and nuclear power would take decades to build. While emissions have fallen in the electricity and land use sectors, all other key sectors have risen over the last 20 years. Per capita emissions remain among the highest in the developed world at 22 tonnes per person as of 2023.
So what are the current government’s policies meant to do? And what would happen if they were removed?
Policies old and new
Australia’s emissions reduction policies range from economy-wide to those focused on sectors.
At a national level, there’s the economy-wide legislated target of cutting emissions 43% by 2030 and the 2050 net zero emissions target.
Then there’s the renewable energy target aiming to have 82% of electricity from renewable sources by 2030, the New Vehicle Efficiency Standard and the heavy-industry Safeguard Mechanism.
These would likely be on the chopping block.
The Coalition’s plan to wind back Australia’s efforts to reach net zero would also likely mean stripping out mention of cutting emissions from the national electricity objectives which guide the energy market regulator, removing fringe benefit tax exceptions for electric vehicles and lifting the moratorium on nuclear power.
Renewable Energy Target
The Renewable Energy Target was introduced in 2001 by the Howard Coalition government. It sets a goal for how much renewable power feeds into the grid each year.
It began with a modest target of 2% renewable energy. In 2007, the Rudd Labor government increased the target to 41 terawatt-hours (TWh) by 2030, expected to be around 20% of total electricity generation.
In 2015, the target was lowered to 33 TWh by 2025 following a review by the Abbott Coalition government. This goal was met in 2021. The policy remains in place until 2030. Wind and solar generators continue to receive renewable energy certificates for each unit of electricity they generate, but demand for these certificates has fallen now that the target has been reached. This means the renewable energy target legislation is no longer the key driver of new renewable investment.
Capacity Investment Scheme
Launched in late 2022, the Capacity Investment Scheme has been underwriting new renewable energy projects. It’s responsible for the significant pipeline of new projects alongside state government renewable energy targets and incentives. The scheme is intended to help get to the goal of 82% renewables and an additional 40 gigawatts of power generating capacity by 2030.
The scheme has been aided by economics. Renewables are now the lowest cost way of generating electricity, even after the cost of adding storage to “firm” output.
This means the push to replace old coal generators before they have to be retired due to unreliability, increasing maintenance costs or because they can’t compete with renewables will continue regardless. Removing either of these two policies is unlikely to stop the shift away from coal.
Safeguard Mechanism
Electricity is now only responsible for 30% of Australia’s total emissions. Fossil fuel use in buildings and industry accounts for 24%, transport 19%, agriculture 16% and waste and fugitive emissions 12%. Policies exist for some of these sectors.
One of the biggest is the Safeguard Mechanism, a scheme first introduced in 2016 by a Coalition government and then significantly modified by the current Labor government in 2023. It covers a significant portion of industrial energy use, applying to 215 of the largest emitting companies in Australia. Under the mechanism, the government’s baseline target for emissions is reduced 5% per year. Companies doing better than this target earn certificates able to be traded with other companies who exceed their targets. It works much like a price on carbon.
Without the mechanism, there is little incentive for these companies to reduce emissions.
Australian Carbon Credit Unit Scheme
Australia’s carbon credits scheme works by awarding certificates for activities which cut carbon emissions in sectors not covered by other policies. Agriculture is a particular focus. These certificates can be sold privately, to the government or traded through the Safeguard Mechanism to offset industrial emissions. The Coalition’s proposed new policy would create a variation of the scheme to be known as the Accountability and Baseline Credit scheme. This would be voluntary and unlikely to create incentives to cut emissions.
New Vehicle Efficiency Standard
Australia’s transport emissions are climbing. On current trends, it will go from the third largest sector in Australia to the largest within five years. In July, the government introduced the New Vehicle Efficiency Standard – the first laws passed which require new vehicles sold in Australia to meet minimum average efficiency across a carmaker’s fleet.
Before this, Australia was the only OECD country without efficiency standards. The target requires a roughly 50% cut in average emissions for new passenger vehicles across a carmarker’s fleet by 2030 compared to 2025. It is expected to drive EV uptake. But as the standard only applies to new vehicles, the sector’s emissions will come down gradually. If the standard is cancelled, it’s unlikely emissions from the car fleet will come down at all.
Where does this leave us?
If the Coalition is elected, their backdown on net zero suggests many if not all of these policies would be scrapped.
Cheap renewables and storage mean the electricity sector will likely continue to get cleaner even without government policies. But that means about 70% of Australia’s total emissions would be left without policy incentives to drive them down.
That’s not to say the current government’s policies are sufficient to meet long term targets. There are still major gaps for areas such as agriculture, trucking and aviation, while policies targeting industrial emissions leave a significant portion of the sector unchecked.
If the current set of policies were to be scrapped, it’s hard to see how Australia could ever meet its international commitments to cut emissions under the Paris Agreement.
Roger Dargaville receives funding from the RACE for 2030 CRC, the Monash-Woodside Energy Partnership and the Electric Power Research Institute. He has conducted consulting work for industry and government departments.
If you follow news about climate change, you’ve probably seen the term “primary energy”.
This phrase refers to the raw energy in fuels and natural resources – the energy content of oil in a barrel, gas in a pipeline, or sunlight hitting a solar panel.
Primary energy is often used to show how much energy humanity uses. The numbers are staggering — billions of tonnes of coal, oil and gas. When graphed, zero-emission options such as renewables and nuclear seem tiny and the sheer bulk of fossil fuels too huge to ever shift. Australia still gets more than 90% of its primary energy from fossil fuels.
But this is misleading. The reason is that truly enormous amounts of energy contained in fossil fuels go to waste. As the world goes electric, it will need much less primary energy for the same result.
From orange to orange juice
To make a glass of orange juice, you start with a whole orange. That’s primary energy. But after peeling, squeezing and straining, the bit we want – the juice – ends up in the glass. This is known as useful energy.
What we actually care about isn’t primary energy – it’s useful energy, the chunk of primary energy that actually powers our appliances, heats our buildings or turns our wheels.
Primary energy and useful energy are often very different. To get energy to our homes, cars or factories, it must first be converted, transported and delivered. Along the way, a surprisingly large fraction is lost – especially from fossil fuels.
Coal power stations burn coal to produce steam to spin turbines to make electricity. Energy is lost every step of the way. As a result, only 35–41% of the energy in coal ends up converted into electricity.
Burning fossil fuels is inherently wasteful. It’s like carrying water in a bucket full of holes — you start with a lot, but by the time it reaches your glass, most has leaked away.
Coal is energy-dense, but most of its energy isn’t actually put to use.mikulas1/Getty
Primary energy has a counting problem
Global energy statistics make renewables look smaller than they really are, not because they produce less electricity, but because of the way primary energy is counted.
Measuring primary energy involves complex assumptions and calculation methods that can lead to unwarranted conclusions.
Take a simple example. Coal, nuclear and solar can all deliver the same 100 units of electricity. But in statistics compiled by the International Energy Agency or European Union, coal and nuclear each show up as 303 units of “primary energy”, while solar shows only 100 units.
This is because the wasted heat from coal and nuclear is counted, but the free fuel of sunlight and wind isn’t.
The result? On paper, renewables look substantially smaller than they really are.
Efficiency, efficiency, efficiency
When we compare energy sources, looking at raw numbers only tells part of the story. For coal, gas, nuclear and biomass power stations, the amount of primary energy used depends on how much potential heat is in the fuel and how efficiently the plant converts this heat into electricity.
When coal is measured on fuel density and conversion, it does well. But by the time coal is dug up, transported, refined, burned and electricity produced and transmitted, much of this potential is lost as waste heat. Older coal power plants are particularly inefficient.
At first glance, solar panels look weak by comparison. They only convert about 20% of sunlight into electricity, while wind turbines seem about as strong as coal, converting about 40% of the energy in wind into electricity.
But solar and wind generate electricity directly. There’s no need to supply fuel, so we avoid the massive conversion losses of thermal power plants or internal combustion engines.
This means that while solar and wind “efficiency” numbers look lower, these energy sources often deliver more usable energy per unit of primary energy than coal does.
In Australia, the economics are now firmly with solar and wind. Even without subsidies, they’re the cheapest way to build new electricity generation, beating coal and gas.
Electrification plugs the leaky bucket
There’s even better news. Across heating, transport and industry, switching from fossil fuels to electric options gives a major boost to energy efficiency, slashing how much energy we need for the same outcome.
Petrol cars convert just 16–25% of the energy in the fuel into actual motion. The rest is wasted — mostly as heat from the engine or as power is transferred to the wheels.
Electric vehicles are much more efficient, using 87–91% of energy supplied by the battery and regenerative braking to move.
Hot water heat pumps are vastly more efficient than gas hot water. For every unit of electricity used, heat pumps deliver 3–5 units of heat. That is, they’re 300–500% efficient. By contrast, gas heaters can have efficiencies between 30% and 80%.
Electricity is a much more efficient way to heat air than gas. Modern gas heaters still waste 10–40% of the heat they generate. Reverse-cycle air conditioners are much more efficient and are the cheapest way to heat a space.
Electricity is also a more efficient way to cook. Induction cooktops transfer 84% of the energy to the pan, compared with 71% for electric coils and just 40% for gas burners.
Going electric is like swapping a leaky bucket for a shiny new one with no holes. Most of the energy you put in is energy you can actually use.
Useful energy, not primary energy
Graphs of primary energy make it seem almost impossible to end our long reliance on fossil fuels.
But primary energy doesn’t really matter. If we focus instead on useful energy, the task ahead is much more doable. Instead of asking how we can replace all of today’s primary energy, the real question is how much useful energy we need, and how clean electricity can provide it more efficiently. Clean, efficient electric options make it possible to double global GDP by 2050 – while using 36% less primary energy.
Renewables, storage and electrification make it possible to deliver energy much more efficiently. This means renewables don’t have to replace every joule of potential fossil fuel energy – just the part we actually use, with far less waste and far fewer emissions.
Asma Aziz does not work for, consult, own shares in or receive funding from any company or organisation that would benefit from this article, and has disclosed no relevant affiliations beyond their academic appointment.