We discovered microbes in bark ‘eat’ climate gases. This will change the way we think about trees

We discovered microbes in bark ‘eat’ climate gases. This will change the way we think about trees

boris misevic knqZ N qJQk unsplash Boris Misevic/Unsplash, CC BY

We all know trees are climate heroes. They pull carbon dioxide out of the air, release the oxygen we breathe, and help combat climate change.

Now, for the first time, our research has uncovered the hidden world of the tiny organisms living in the bark of trees. We discovered they are quietly helping to purify the air we breathe and remove greenhouse gases.

These microbes “eat”, or use, gases like methane and carbon monoxide for energy and survival. Most significantly, they also remove hydrogen, which has a role in super-charging climate change.

What we discovered has changed how we think about trees. Bark was long assumed to be largely biologically inert in relation to climate. But our findings show it hosts active microbial communities that influence key atmospheric gases. This means trees affect the climate in more ways than we previously realised.

Paperbark trees stand in a wetland.
The Australian paperbark tree is a hardy wetland species and a hotspot for microbial life. Luke Jeffrey, CC BY-ND

Teeming with life

Over the past five years, collaborative research between Southern Cross and Monash universities studied the bark of eight common Australian tree species. These included forest trees such as wetland paperbarks and upland eucalypts. We found the trees in these contrasting ecosystems all shared one thing in common: their bark was teeming with microscopic life.

We estimate a single square metre of bark can hold up to 6 trillion microbial cells. That’s roughly the same number of stars in about 60 Milky Way galaxies, all squeezed onto the surface area of a small table.

To find out what these bark microbes were doing, we first used a technique called metagenomic sequencing. In simple terms, this method reads the DNA of every microorganism in a sample at once. If normal DNA sequencing is like reading one book, metagenomics is like scanning an entire library. We pulled out clues about who lived in the bark and which “tools” or enzymes they might have.

A man wearing glasses and a labcoat looks at samples in a laboratory.
Dr Bob Leung preparing bark samples for lab measurements at Monash University. Jialing Zeng, CC BY-ND

A simple analogy is to imagine a construction site where each tradespeople carries different tools. While some tools overlap, many are specific to their trade. If you see a pipe wrench, you can deduce a plumber is around.

In a similar way, metagenomics showed us the “tools” the microbes were carrying in their DNA – genes that let them eat atmospheric gases like methane, hydrogen or carbon monoxide. This gave us valuable insight into what the bark microbes could do.

But, like a construction site, having tools doesn’t mean the “tradies” are using them for jobs all the time. So we also measured the movement of gases in and out of the bark to see which microbial “jobs” were happening in real time.

A group of people in a scrubby forest taking bark samples.
The research team taking field measurements and collecting bark samples in tropical forests near Darwin. Luke Jeffrey, CC BY-ND

Bark microbes eat gases

Many of the microbes living in bark can live off various gases. This is a process recently coined as “aerotrophy”, as in “air eaters”. Some of their favourite gases include methane, hydrogen and carbon monoxide, all of which affect the climate and the quality of the air we breath.

Methane is a potent greenhouse gas, responsible for about one third of human-induced warming. We found most wetland trees contained specialist bacteria called methanotrophs, that eat methane from within the tree.

We also saw abundant microbial enzymes that remove carbon monoxide, a toxic gas for both humans and animals. This suggests tree bark helps clean the air we breathe. This could be particularly useful in urban forests, as cities often have elevated levels of this harmful and odourless gas.

But one finding stood out above all others. Within every tree species examined, in every forest type, and at every stem height, bark microbes consistently removed hydrogen from the air. In other words, trees could be a major, previously unrecognised, global natural system for drawing down hydrogen out of the atmosphere.

Tape and a flat scientific device are wrapped around the trunk of a tree.
Measuring paperbark tree stem gases using a stem gas flux chamber in a freshwater wetland. Luke Jeffrey, CC BY-ND

Global possibilities

When we scaled up what these microbes were doing across all trees globally, the potential impact becomes striking. There are about 3 trillion trees on Earth, and together their bark has a huge cumulative surface area, rivalling that of the entire land surface of the planet.

Taking this into account, our calculation suggests that tree-microbes could remove as much as 55 million tonnes of hydrogen from the atmosphere each year.

Why does this matter? Hydrogen affects our atmosphere in ways that influence the lifetime of other greenhouse gases – especially methane. In fact, hydrogen emissions may be “supercharging” the warming impact of methane.

By using a simple model, the annual amount of hydrogen removed by bark microbes may indirectly offset up to 15% of annual methane emissions caused by humans.

In other words, if tree bark microbes weren’t doing this work, there would be more methane in the atmosphere, and our rising methane problem could be even bigger.

This also hints at another exciting possibility: planting trees could expand this microbial atmosphere-cleaning potential, giving microbes more surface area to apply their trade and help remove even more climate damaging gases from the air.

Video explainer around how microbes found in bark enhance benefits of trees by removing greenhouse gases.

The ‘barkosphere’

Our research points to many exciting new possibilities and uncertainties around the previously hidden role of a tree’s “barkosphere”.

We want to know which tree species host the most active “gas-eating” microbes, which forests remove the most methane, carbon monoxide or hydrogen, and how climate change may alter these communities and their activities.

This knowledge could help guide future reforestation, conservation, carbon accounting strategies. It may even change the way we try and limit climate change.

Trees have always regulated our climate. But now we know their bark – and the hard working microscopic ecosystems living inside – may be far more important than previously thought.

A group of trees, photo taken from below.
The results of this research could have major implications for how we use trees to combat global warming. Luke Jeffrey, CC BY-ND

The Conversation

Luke Jeffrey receives funding from the Australian Research Council through an ARC DECRA Fellowship.

Chris Greening receives funding from the Australian Research Council, National Health & Medical Research Council, Australian Antarctic Division, Human Frontier Science Program, and Wellcome Trust.

Damien Maher receives funding from the Australian Research Council.

Pok Man Leung receives funding from the Australian Research Council through an ARC DECRA Fellowship.

My home is in a district facing extreme or catastrophic fire danger. What should I do?

My home is in a district facing extreme or catastrophic fire danger. What should I do?

The Longwood fire on the night of January 7, 2026 Getty

Across Australia there are a number of fire districts facing extreme or catastrophic fire danger ratings in this ongoing heatwave.

As of late Thursday in Victoria, the South-West, Wimmera, Northern Country and North Central districts have been assigned a catastrophic rating, while the rest of the state has been assigned an extreme rating. South Australia has nine districts with a forecast of extreme.

Australia’s fire danger ratings are designed to provide a clear, consistent warning system for communities.

There are four ratings that communicate to the public how dangerous a fire would be if one started, rather than how likely it is to occur. These ratings guide the actions that community members should take before and during a “bad” fire day.

Victoria fires in pictures

The warnings

  1. A moderate warning suggests most fires can be controlled by fire agencies. You should “plan and prepare” by revisiting your bushfire plan, preparing your property and discussing evacuation plans.

  2. A high warning means fires can become dangerous and there is a heightened risk to life and property. You should be “ready to act”, which includes being alert for fire in your area. Know what you will do if a fire does start and be prepared to act quickly. Pack an emergency kit in case you need to leave and alert emergency contacts.

  3. An extreme warning means fires can spread quickly and are extremely dangerous. Fires under these conditions are unlikely to be suppressed. You should “take action now to protect life and property” by enacting your bushfire plan. This can include leaving bushfire danger areas early in the day.

  4. And a catastrophic warning means fires are at their most dangerous. They will be uncontrollable and pose the greatest threat to human life. You should enact your bushfire plan and “leave bushfire risk areas early for your survival”, given homes cannot withstand fires under these conditions. For your survival, do not be in bushfire danger areas.

How are they decided?

Fire danger ratings are calculated by state and territory fire agencies. They consider factors such as:

  • forecast weather data from the Bureau of Meteorology (BoM) such as temperature, relative humidity and wind speed
  • vegetation fuel loads, including the amount of combustible materials, and
  • short and long-term dryness conditions, such as grass curing and drought levels, respectively.

All of these factors can play a significant role in determining the type of fire behaviour that could occur if one breaks out.

Each state and territory is broken up into fire danger districts, and ratings are issued for each district. Ratings are available up to three days in advance, allowing the public to see upcoming conditions and prepare early.

You may need to act the day before a bad bushfire day, so it is wise to check upcoming fire danger ratings. With many people travelling at this time of year, it is also important to check each district you will visit or pass through.

Here’s where you can check current fire danger ratings for each state and territory:

Forecasts for each state and district are also available on the BoM website.

What to do next

If your area has been given a fire danger rating, examine your bushfire plan. Ideally your plan is in place before the bushfire season and includes considerations such as:

  • Which Fire Danger Rating is your trigger to leave?
  • Where will you go?
  • What route will you take – and what is your alternative in the event that a fire is already in the area?
  • What do you need to organise for pets or livestock?
  • How will you stay informed about warnings and updates?
  • What will you do if there is a fire in the area and you cannot leave?

Ensure your property is prepared and you understand your plan. Follow any actions given by authorities and the fire ratings. Leaving early is always the safest option.

If a fire does start in your area, the relevant fire agency will issue a further alert to describe the situation. There are three alert levels.

  1. Advice: A fire has started. There is no immediate danger. Stay up to date in case the situation changes.
  2. Watch and Act: There is a heightened level of threat. Conditions are changing and you need to start taking action now to protect yourself and your family.
  3. Emergency Warnings: An emergency warning is the highest level of bushfire alert. You may be in danger and need to take action immediately. Any delay puts your life at risk.

However, do not wait for an alert to be issued to take action. Fires can escalate quickly so there may not be any warning. These alert levels can also change rapidly, particularly under extreme and catastrophic fire danger conditions.

Stay informed through your local ABC radio station as the official emergency broadcaster, and through your state-based emergency app for notifications about fires and warning levels. In Victoria, for example, this is VicEmergency and in South Australia it is Alert SA.

A dangerous day ahead

Total fire bans will be in place on Friday across Victoria and for the nine South Australian districts with the extreme fire danger rating. This means no fires can be lit in the open air while the ban is in place, and heavy penalties apply.

Key things to do

  • Examine your bushfire plan.
  • Reconsider your plans. Any non-essential travel or activity in areas currently affected by fire, or with catastrophic ratings should be carefully considered and cancelled if possible.
  • Complete final preparations for your property. If you are not prepared, plan to leave early. Under catastrophic conditions, help may not be available. The recommendation is to leave early, which may mean leaving the day before a high-risk day. Do not wait for a fire to start in your area.
  • Download the relevant state-based emergency app for notifications about fires and warning levels.

Know your fire danger rating, be prepared, stay informed, and act early to ensure your safety.

The Conversation

Sarah McColl-Gausden has received funding from the Victorian Department of Energy, Environment and Climate Action including through the Integrated Forest Ecosystem Research program. She is a member of the Ecological Society of Australia.

Bianca Pickering receives funding from the Victorian Department of Energy, Environment and Climate Action including through the Integrated Forest Ecosystem Research program. She is a volunteer for the Country Fire Authority.

Kate Parkins has received funding from the Victorian Department of Energy, Environment and Climate Action, Natural Hazards Research Australia and state fire agencies. She is a member of the Ecological Society of Australia.

Victoria bushfires at a glance

Victoria bushfires at a glance

The Longwood fire from Mt Wombat, January 8, 2025 Erika Smyth/Facebook

Victoria is bracing for potentially catastrophic bushfire conditions on Friday, with temperatures expected to top 40°C for the third day in a row in parts of the state and winds up to 100 kilometres per hour.

The conditions will be the worst the state has seen since the Black Summer bushfires of 2019–20. The Country Fire Authority’s Jason Heffernan called it “a very dire bushfire day”.

Two major fires are burning in the state – one in Longwood, where residents have been warned to leave; and another in the Mount Lawson State Park along the Murray River near Walwa, which is now generating its own fire-fuelled thunderstorms.

Victoria fires in pictures and video


Where are the fires?


How the Longwood fire has spread

The Conversation

Digital Storytelling Team does not work for, consult, own shares in or receive funding from any company or organisation that would benefit from this article, and has disclosed no relevant affiliations beyond their academic appointment.

‘The most dangerous day’: bushfires break out in Victoria as BoM warns of catastrophic conditions to come

Temperatures recorded included 48.2C at Wudinna airport on SA’s Eyre Peninsula, 45.9C at Walpeup in Victoria, 45.6C at Paraburdoo, WA, and 45.9C at Hay in NSW.

Victoria’s Hume Highway was closed on Thursday and regional trains were cancelled as firefighters from at least two states fought bushfires in the worst heatwave to descend on Australia since 2019-20.

As Melbourne prepared for a forecast of 41C day on Friday, the acting premier, Ben Carroll, described Victoria as “one of the most bushfire-prone areas in the world”.

Continue reading…